HV/HVS Series Cylinder Hydraulic Cone Crusher

Introduction of HV/HVS Series Cylinder Hydraulic Cone Crusher:

HV/HVS series single cylinder hydraulic cone crusher features in the advanced structural design, excellent crushing capacity, outstanding reliability and low production and operation costs. Moving the head up and down by a single hydraulic cylinder, it implements several functions such as discharge port adjustment, cleaning cavity, over iron and overload protection, etc; by configuring the intelligent discharge port control and protection system, better production process control and operation optimization is achieved.

HVS series single cylinder hydraulic cone crusher and HV series cone crusher shares the similar principle and structure but with larger particle size, making it more suitable for medium crushing operation of metal mines and sand aggregate.

Advantages of HV/HVS Series Cylinder Hydraulic Cone Crusher:

• High crushing capacity

• Lower production cost

• Wide application range

• Easy operation and maintenance

• High level of automation

The production capacity table can be used as a tool for preliminary selection of HV single digital series single cylinder cone crusher. The data in the table is suitable for the materials with loose density of 1.6t/m3, feeding screen less than the particle grade of the discharge port in the feed of open circuit production capacity. In the feed with a high content of fine particle size and closed circuit operation, the equipment capacity is 15%-30% higher than that of open circuit operation.As an important part of the production loop, the performance of the crusher partly depends on the correct selection and operation of feeder, belt conveyor, vibrating screen, supporting structure, motor, transmission device and feed bin.

The following factors can increase the production capacity and performance of the crusher

1. Selecting the suitable crushing chamber for the crushing material.

2. Appropriate proportion of feed particle size.

3. Controlling the feeding amount.

4. Feeding material is distributed evenly in the 360°range of the crushing chamber.

5. The specifications of the discharge conveyor are compatible with the maximum processing capacity of the crusher.

6. Re-screening and select the appropriate specification of pre-screening and closed-circuit screening sieve.

7. Automatic control.

8. The crusher discharge area is unobstructed.

The following factors will reduce the production capacity and performance of the crusher

1. Feeding cohesive material in the crusher.

2. The fine particle size in the feed less than the discharge port exceeds 10% of the crusher's production capacity.

3. Water content of the feeding material is too much.

4. Feed segregation in the crushing chamber.

5. The feeding material is not distributed evenly around the crushing chamber.

6. Lack of feeding control.

7. Not taking sufficient capacity as recommended.

8. Conveyor capacity is insufficient.

9. The capacity of pre-screening and closed-circuit screening is insufficient.

10. Crusher discharge area is obstructed.

11. Feed is too hard or tenacious.

12. Crusher operating under the recommended speed.

Note: The particle size table can be used as a tool for preliminary selection of HVS single digital cone crusher. The data in the table is applicable to metal mines, hardness ≥16, loose density of 1.6t/m3, feeding screen less than the particle grade of the discharge port in the feed of open circuit operation.

If it is an aggregate mine or a fragile mine (represented by hard limestone), the particle size curve shifts to the left. For detailed grain size distribution, please consult with Shunda Mining.

Note: The particle size table can be used as a tool for preliminary selection of HV single digital cone crusher. The data in the table is applicable to metal mines, hardness ≥16, loose density of 1.6t/m3, feeding screen less than the particle grade of the discharge port in the feed of open circuit operation.

If it is an aggregate mine or a fragile mine (represented by hard limestone), the particle size curve shifts to the left. For detailed grain size distribution, please consult with Shunda Mining.

FAQ

Q: What is your company's business principle?

A: Our company regards quality as life and serving users as God.

Q: What is our warranty?

A: 100% brand new when leaving the factory, the seller guarantees the quality of the machine (excluding easy-to-wear parts) for one year from the date of completion of the trial run, but no more than 15 months from the date the machine leaves the factory.

Q: What is the price of this product?

A: We can give the lowest price than the market, and we will provide a quotation for any customer as soon as possible, and discounts can be given according to quantity.

Q: Service and payment terms?

A: We can accept T/T and L/C; 30% deposit, 70% balance paid before delivery, which is an international trade practice; finished product pictures will be provided to customers before delivery.